Hantzsch ester: what it reduces, how it works under light and why a reduction fails
Share
Hantzsch ester: what it reduces, how it works under light and why a reduction fails
When to choose it, how it gives a hydride, a hydrogen atom or an electron, which catalyst each substrate needs, worked examples with yields, and how to check a bottle by 1H NMR
Hantzsch ester is a mild organic reducing agent. With an organocatalyst it reduces C=C and C=N bonds without a metal or hydrogen gas. Under light it gives hydrogen atoms and electrons. This guide covers the catalyst for each substrate class, the reported conditions and yields, the causes of a failed reduction and a 1H NMR check of the bottle.
Contents
- Overview of the reactions
- 1. When Hantzsch ester is the right reducing agent
- 2. What the reagent is and how it gives up hydrogen
- 3. How strong a hydride donor it is
- 4. Reductions with organocatalysts
- 5. Reactions under light
- 6. Why a reduction fails
- 7. Checking a bottle by 1H NMR
- 8. Storage, handling and amounts
- 9. Summary
- Products in this article
Hantzsch ester (HEH, diethyl 1,4-dihydro-2,6-dimethylpyridine-3,5-dicarboxylate) gives a hydride and a proton and becomes an aromatic pyridine, the Hantzsch pyridine (Scheme 1).[1]
Scheme 1. Hantzsch ester and the Hantzsch pyridine with their CAS numbers, formulae and molar masses. NADH, the biological hydride donor, gives its hydride from the same ring position.[1] Our drawing.
The substrates are enals, enones, imines, nitroalkenes and quinolines, each with an amine, acid or thiourea catalyst. Chiral catalysts often give high enantioselectivity. Under light, Hantzsch ester takes part in photoredox dehalogenations; after direct excitation, it reduces substrates and nickel catalysts without a photocatalyst. Every reduction leaves the Hantzsch pyridine as the by-product.[1][2][3]
The article begins with the choice of the reagent (section 1) and ends with storage and a summary (sections 8 and 9). Each yield is the value reported for one example in one publication, and another substrate may give a different result. The main conclusions are printed in bold.
In the figures, a hydrogen transferred from Hantzsch ester is gold in the reagent and in the product. A disc of the same colour marks the stereocentre formed in the reduction. Curved arrows show the movement of electron pairs. Each caption states whether the figure is our drawing, our chart of published values or a simulation.
Shorthand used in this article:
- HEH: Hantzsch ester; Hantzsch pyridine: diethyl 2,6-dimethylpyridine-3,5-dicarboxylate, its oxidised form
- Iminium ion: the cation formed from a carbonyl compound and a secondary amine
- ee: enantiomeric excess; er: enantiomer ratio
- equiv: moles of reagent per mole of substrate
- TCA: trichloroacetic acid; DMA: N,N-dimethylacetamide; THF: tetrahydrofuran
- SCE: saturated calomel electrode, the reference for the potentials
- Stern–Volmer experiment: a measurement of how strongly an added compound quenches the emission of an excited photocatalyst
- EDA complex: electron donor–acceptor complex; NHPI ester: an ester of a carboxylic acid with N-hydroxyphthalimide
Overview of the reactions
| Transformation | Catalyst | Conditions of the example | Section |
|---|---|---|---|
| β,β-Disubstituted enal to the saturated aldehyde with a β-stereocentre | Chiral imidazolidinone, as its TCA salt | Chloroform, −30 °C | 4 |
| Enal to the saturated aldehyde, racemic or achiral | Dibenzylammonium salt (5 mol%) | 1.1 equiv of HEH, THF, room temperature | 4 |
| Cyclic enone to the saturated ketone | Furyl imidazolidinone with TCA | Diethyl ether, 0 °C; the di-tert-butyl ester gave the higher ee | 4 |
| N-Aryl ketimine to the chiral amine | Chiral phosphoric acid | 1 mol% of the acid TRIP | 4 |
| Ketone and aryl amine to the chiral amine, in one flask | Chiral phosphoric acid with SiPh3 groups | Benzene, 40 °C, 5 Å molecular sieves | 4 |
| Aldehyde and aniline to the secondary amine | Thiourea (10 mol%) | 1.2 equiv of HEH, toluene, 70 °C, 5 Å molecular sieves | 4 |
| Aldimine to the secondary amine; conjugated nitroalkene to the nitroalkane | Schreiner’s thiourea | 1 mol% of the catalyst for aldimines | 4 |
| 2-Substituted quinoline to the 1,2,3,4-tetrahydroquinoline | Chiral phosphoric acid, or Schreiner’s thiourea for the racemate | 2.4 equiv of HEH with the acid; 3.0 equiv, toluene, 60 °C with the thiourea | 4 |
| Aldehyde and cyclic 1,3-dione to the 2-alkyl-1,3-dione | Proline | One flask | 4 |
| Activated alkyl halide to the reduced product, R–X to R–H | Ru(bpy)3Cl2 | iPr2NEt with HEH or formic acid, visible light | 5 |
| α-Bromo ketone to the ketone | None | Light only; with oxygen, the α-hydroxy ketone forms | 5 |
| NHPI ester and aryl bromide to the alkylarene | Nickel complex with dtbbpy (10 mol%) | 2.0 equiv of HEH, DMA, 390 nm light | 5 |
The reactions described in this article and the section for each. The conditions are those of the examples in the sections; HEH is Hantzsch ester.
1. When Hantzsch ester is the right reducing agent
Hantzsch ester is a stable, yellow solid and a synthetic model of NADH.[1][4] The hydride from C-4 and the proton from nitrogen (Scheme 1) together add the equivalent of H2 to a C=C or C=N bond.[1][5]
Metal-catalysed methods can reduce halogens, esters and aldehydes. With Hantzsch ester and an organocatalyst, these groups do not react.[3] Figure 1 shows six products made with the reagent. Table 1 lists the tasks for which it is chosen, either for this selectivity or because no metal is needed.
Figure 1. Six products made with Hantzsch ester. (a) Hydride transfer with an organocatalyst. (b) Reactions under light. Gold marks three things: a hydrogen that comes from Hantzsch ester, a new stereocentre (disc) and, in the alkylarene, the new C–C bond. In the alkane, the hydrogen is left dark because the amine is its primary source. Our drawing of examples from sections 4 and 5.[6][7][8][9][10][11]
| Task | What the reagent offers | Published example |
|---|---|---|
| Reduce the C=C bond of an enal and keep the aldehyde | The hydride adds to the β-carbon of an iminium ion. The List group detected no product of carbonyl reduction. | Yields of 81–96% with 5 mol% of a dibenzylammonium salt and 1.1 equiv of Hantzsch ester in THF at room temperature, 5–6 h[5][12] |
| Set a β-stereocentre without a metal or hydrogen gas | A chiral imidazolidinone salt takes the place of the metal complex. | (S)-3-Phenylbutanal in 93% ee[6] |
| Use an E/Z mixture of the enal | The amine catalyst interconverts the two isomers before the hydride adds. | The (E)- and (Z)-isomers of a 4-nitrophenyl enal both gave the (R)-aldehyde in 97:3 er[12][13] |
| Keep a halogen in the substrate | Halogens are inert under the organocatalytic conditions.[3] | 92% yield and 97% ee for a halogen-substituted enal (Table 3, entry 4 of the paper)[6] |
| Make a chiral amine from a ketone in one flask | A chiral phosphoric acid activates the imine as it forms. | Acetophenone and 4-methoxyaniline, 94% ee[3][14] |
| Reduce a conjugated nitroalkene and keep the nitro group | Only the C=C bond accepts the hydride. | Nitroalkanes with Schreiner’s thiourea[15] |
| Reduce only the nitrogen ring of a quinoline | Two hydrides add in sequence to the protonated heterocycle. | Tetrahydroquinoline alkaloids[8] |
| Remove an activated halogen through a radical without tin hydride | An amine supplies the electron; its radical cation, formate and Hantzsch ester give the hydrogen atom. | Photoredox dehalogenation with Ru(bpy)3Cl2[9][16] |
| Run a nickel cross-coupling without a metal reductant | Excited Hantzsch ester delivers the active Ni(0) species (proposed mechanism). | 79% of an alkylated pyridine[11] |
Table 1. Tasks for which Hantzsch ester is chosen, with one published example of each.
Three limits
- It is a mild hydride donor. Most substrates need a catalyst that makes them more electrophilic (section 3). On its own, it is known to deliver hydride to electrophilic π-systems.[3]
- Each substrate class needs its own catalyst. The imidazolidinone salts developed for enals gave 0% and 5% of product with a cyclic enone.[17]
- The by-product stays in the flask. One mole of reagent (253 g) transfers two hydrogens (2 g) and leaves 251 g of Hantzsch pyridine, which extraction does not remove.[18]
Hantzsch ester is chosen to reduce a C=C or C=N bond without a metal or hydrogen gas while halogens, esters and aldehydes stay intact.
Products: Hantzsch ester
2. What the reagent is and how it gives up hydrogen
Hantzsch ester can give up its C-4 hydrogen in three ways: as a hydride, as a hydrogen atom, or as a proton after it has lost one electron. All three paths end at the Hantzsch pyridine (Figure 2).
Figure 2. The three paths from Hantzsch ester to the Hantzsch pyridine. Our drawing. The numbers are C4–H bond dissociation energies in acetonitrile, measured by titration calorimetry and electrochemistry.[19] The oxidation potential is from cyclic voltammetry,[20] and the value for the excited state is as reported.[10][11]
Hydride. In acetonitrile, heterolytic cleavage of the C4–H bond, which releases H−, costs 69.3 kcal/mol.[19] An iminium ion or a protonated imine accepts this hydride (section 4).
Hydrogen atom. Homolytic cleavage of the same bond costs 69.4 kcal/mol.[19] A carbon radical takes this hydrogen atom (section 5).
Electron. Hantzsch ester is oxidised at +0.89 V vs SCE.[20] The radical cation is a strong acid: for the ten NADH models of the 2003 study, its deprotonation costs 4.1–9.7 kcal/mol.[19] The dihydropyridyl radical that remains is a reductant: for the N-methyl Hantzsch ester, it was proposed as the species that reduces an excited ruthenium photocatalyst.[16]
The by-product is the Hantzsch pyridine. It is a weak base: its pKaH in acetonitrile is 10.4, slightly below that of 3-acetylpyridine (10.8).[21]
| Property | Value |
|---|---|
| CAS number | 1149-23-1 |
| Formula | C13H19NO4 |
| Molar mass | 253.29 g/mol |
| Purity | ≥97% |
| Form | Light yellow to yellow crystalline powder |
| Melting point | 175–180 °C |
| Solubility | Soluble in most common organic solvents, including ethanol, dichloromethane and chloroform; practically insoluble in water |
| Storage | Cool, dry place, tightly sealed container, protected from light |
| Retest period | 36 months from the date of manufacture |
Table 2. Hantzsch ester: data from the NorrChemica product page.[4]
The two bond energies differ by 0.1 kcal/mol. Whether Hantzsch ester transfers a hydride or a hydrogen atom depends on the reaction partner (our reading of these values).
Products: Hantzsch ester
3. How strong a hydride donor it is
Figure 3. Mayr nucleophilicity N of twelve hydride donors, our chart of the published values.[22][23][24] A higher N means faster hydride transfer to the same electrophile. Values measured in different solvents are not strictly comparable. The rate also depends on a second parameter, sN, which is not shown.
The Mayr scale ranks nucleophiles by their rates of reaction with reference electrophiles. Hantzsch ester has N = 9.00 in dichloromethane.[22] Borohydrides in DMSO are stronger hydride donors (N = 11.5 to 15.1). Cyanoborohydride in water (9.99), the borane–triethylamine complex (8.90) and N-benzyl-1,4-dihydronicotinamide (8.67) are close to Hantzsch ester. Silanes are far weaker (0.06 to 3.58).[23][24]
In the reactions of section 4, the catalyst first turns the substrate into an iminium ion or a protonated imine. These cations are much more electrophilic than the neutral substrate, and Hantzsch ester transfers its hydride to them.[6][7]
Hantzsch ester is a mild donor. For most polar reductions, the catalyst must first activate the substrate, as a cation or, with a thiourea, through hydrogen bonds.
Seven donors in one reaction
In 2005, the group of David MacMillan at the California Institute of Technology compared seven NADH-type donors in one organocatalytic enal reduction at −30 °C. The diethyl ester, Hantzsch ester itself, gave 92% conversion in 7 h and 92% ee, the highest enantioselectivity of the series.[6]
Figure 4. Seven hydride donors tested in the same enal reduction, with the time, the conversion (by gas chromatography) and the ee from Table 2 of the paper.[6] The paper describes NADH as not a viable reagent. Structures drawn by us.
The N-benzyl dihydronicotinamide has almost the same N as Hantzsch ester in Figure 3, but it gave 15% conversion in 26 h. In a 2007 account, the same laboratory presumes that the by-product is the cause: this donor ends as a 1-alkylpyridinium ion, whereas catalyst turnover needs a protonated pyridine.[3]
The two N-substituted donors, NADH and the N-benzyl compound, were the least efficient of the seven.
Products: Hantzsch ester
4. Reductions with organocatalysts
The group of Benjamin List at the Max-Planck-Institut für Kohlenforschung reported the organocatalytic reduction of enals with Hantzsch ester in 2004, at first without control of the new stereocentre. Asymmetric versions followed in 2005 from the same group and from the MacMillan laboratory.[5][6][13] The method was then extended to cyclic enones, imines, reductive aminations and quinolines.
Enals: the iminium route
Figure 5. Reduction of an enal through an iminium ion. (a) Worked example:[6] (E)-3-phenylbut-2-enal gives (S)-3-phenylbutanal with the diethyl ester and the imidazolidinone catalyst shown on the right, used as its trichloroacetic acid (TCA) salt, in chloroform at −30 °C. (b) The iminium route, with pyrrolidine in place of the catalyst for clarity. Our schemes, after the paper. The catalyst is shown as the (2S,5S) enantiomer of the commercial reagent; the text of the paper does not state its configuration.
The amine catalyst condenses with the enal to give an iminium ion. Hantzsch ester transfers a hydride to the β-carbon, and hydrolysis of the resulting enamine releases the saturated aldehyde and the catalyst.[6]
Figure 6. The hydride transfer step, with the amine drawn as pyrrolidine. The electron pair of one C4–H bond moves to the β-carbon (gold arrow), and the π electrons of the iminium ion move towards nitrogen. Our curved-arrow drawing of the step described in the paper;[6] it shows the bonds that change, not the geometry of the transition state.
The catalyst also interconverts the E and Z isomers of the enal before the hydride adds, so a mixture of the two gives one enantiomer of the product.[6][13]
Result of the worked example: 91% conversion and 93% ee after 23 h at −30 °C.
A racemic or achiral product needs no chiral catalyst: a simple ammonium salt is enough. The 2004 method used 5 mol% of a dibenzylammonium salt and 1.1 equiv of Hantzsch ester in THF at room temperature and gave the saturated aldehydes in 81–96% yield within 5–6 h.[5][12]
Cyclic enones
A ketone forms an iminium ion less readily than an aldehyde. With 3-phenyl-2-cyclopentenone, the two imidazolidinone salts that reduce enals gave 0% and 5% of product. A furyl imidazolidinone with TCA in diethyl ether at 0 °C gave the ketone.[17]
The enantioselectivity then depended on the ester group. Hantzsch ester gave 96% conversion and 74% ee in 3 h; the di-tert-butyl analogue gave 86% conversion and 91% ee in 6 h.[17]
Figure 7. Reduction of 3-phenyl-2-cyclopentenone to (R)-3-phenylcyclopentanone with a furyl imidazolidinone catalyst and trichloroacetic acid. Data from Table 1 of the paper;[17] scheme drawn by us.
With the di-tert-butyl ester, cyclopentenones, cyclohexenones and cycloheptenones gave 70–82% yield and 90–95% ee.[17]
In this study, the bulkier di-tert-butyl ester gave the higher ee, and Hantzsch ester reacted faster.
Imines and reductive amination
A chiral phosphoric acid protonates an imine, and Hantzsch ester transfers the hydride to the resulting cation. The groups of Magnus Rueping and Benjamin List reported this reduction of ketimines in 2005. With the catalyst of the second report, known as TRIP, 1 mol% was enough for high yields and enantioselectivities.[7][25]
Figure 8. Chiral phosphoric acid catalysis, drawn by us. (a) The acid protonates the ketimine, and Hantzsch ester transfers the hydride to the resulting iminium ion. (b) The 3,3′ substituents R of three catalysts. SiPh3: reductive amination with aryl amines. 2,4,6-Triisopropylphenyl (TRIP): imine reduction and the amination with benzylamine. 9-Phenanthryl: quinoline reduction.[8][14][25][26]
The imine can also form in the same flask from a ketone and an amine. In 2006, the MacMillan laboratory developed this direct reductive amination with a new phosphoric acid that carries SiPh3 groups at the 3,3′ positions, in benzene at 40 °C with 5 Å molecular sieves. Acetophenone and 4-methoxyaniline gave the amine in 94% ee. Methyl alkyl ketones reacted in 49–75% yield and 83–94% ee.[3][14]
With benzylamine and TRIP, acetophenone gave the N-benzyl amine in 96% yield and 94:6 er (5 mol% of the acid, toluene, 57 °C, 5 days, with a Dean–Stark trap under reduced pressure to take out the water). The benzyl group is easy to cleave, and basic hydrolysis removed the pyridine by-product.[26]
For achiral amines, thiourea catalyses the reductive amination of aldehydes. It activates the imine through hydrogen bonds, so no acid and no metal are needed.[27]
Figure 9. Worked example: thiourea-catalysed reductive amination of benzaldehyde with 4-methoxyaniline, a 2006 method of Menche and Arikan in Braunschweig.[27] The amounts are those of the general procedure. The molecular sieves remove the water formed with the imine. The dashed lines are the two hydrogen bonds by which thiourea activates the imine. Scheme drawn by us.
Result: 93% isolated yield with 1.2 equiv of Hantzsch ester and 10 mol% thiourea at 70 °C.
The thiourea loading can be lowered to 1 mol% if the reaction time is longer than 48 h. Benzene and dichloromethane were as suitable as toluene; more polar solvents such as dioxane and tetrahydrofuran (THF) were less efficient.[27]
A caution. In 2007, Zhang and Schreiner questioned some published results on thiourea-catalysed reductive aminations of aldehydes and ketones. A highlight of their paper reports that one catalyst was inefficient for the reductive amination of benzaldehyde, and that the aryl thiourea of the next section gave the product in 86% yield.[28][29] The highlight does not name the inefficient catalyst, and we did not read the paper itself. If thiourea itself gives little product, we suggest Schreiner’s thiourea.
Schreiner’s thiourea
An aryl thiourea, N,N′-bis[3,5-bis
Figure 10. Reductions with Hantzsch ester and Schreiner’s thiourea, drawn by us from the papers. (a) Aldimines to secondary amines.[28] (b) Conjugated nitroalkenes to nitroalkanes.[15] (c) Worked example from 2014: 2-phenylquinoline to 2-phenyl-1,2,3,4-tetrahydroquinoline in 90% yield.[31] The catalyst is achiral, so the product is racemic.
For a racemic tetrahydroquinoline, Schreiner’s thiourea can be used in place of the chiral phosphoric acid; with 3 mol%, 2-phenylquinoline gave 90%.
Quinolines: two hydrides in one cascade
A quinoline is aromatic, but a chiral phosphoric acid and Hantzsch ester reduce the 2-substituted compounds to 1,2,3,4-tetrahydroquinolines, as the Rueping group in Frankfurt showed in 2006.[8] The acid protonates the quinoline, and a first hydride adds at C-4. Protonation of the resulting enamine at C-3 gives an iminium ion, and a second hydride adds at C-2.[8]
Figure 11. Cascade reduction of 2-phenylquinoline, drawn by us from the paper.[8] The original work used 2.4 equiv of Hantzsch ester. The catalyst is a BINOL-derived phosphoric acid with 9-phenanthryl groups.
The same cascade, followed by N-methylation, was used to make the tetrahydroquinoline alkaloids galipinine, cuspareine and angustureine.[8]
Each quinoline consumes two equivalents of Hantzsch ester and leaves the same amount of the pyridine.
Reductive alkylation of 1,3-diones
An aldehyde and a cyclic 1,3-dione condense to an alkylidene dione, an alkene with two carbonyl groups on one carbon. Hantzsch ester reduces this electron-poor alkene. In 2006 and 2007, the group of Dhevalapally Ramachary at the University of Hyderabad combined the two steps: with proline as the catalyst, an aldehyde, dimedone or 1,3-cyclohexanedione and Hantzsch ester give the 2-alkyl-1,3-dione in one flask.[32][33]
Figure 12. Reductive alkylation of dimedone: Knoevenagel condensation, then reduction of the alkylidene dione by Hantzsch ester. Our drawing of the sequence described in the abstracts;[32][33] we give no yields because we did not read the full texts.
The aldehyde supplies the new carbon substituent, so no alkyl halide is needed.
With an amine, acid or thiourea catalyst, Hantzsch ester reduces enals, cyclic enones, imines, nitroalkenes and quinolines. Each substrate class has its own catalyst.
Products: Hantzsch ester · Schreiner’s thiourea
5. Reactions under light
In photoredox reactions, Hantzsch esters are electron donors and proton sources.[2] In the examples below, Hantzsch ester has three roles. It donates a hydrogen atom to a carbon radical, passes an electron to an excited photocatalyst and, after direct excitation, is itself the photoreductant.
A photoredox dehalogenation with an amine
In the 2009 method of Stephenson and co-workers, the photocatalyst is Ru(bpy)3Cl2. The amine iPr2NEt is the stoichiometric reductant, used together with formic acid or Hantzsch ester. The amine reduces the excited state, Ru(bpy)32+*, and the resulting Ru(bpy)3+ transfers an electron to an activated C–X bond.[9][16]
According to the 2013 review, the carbon radical takes its hydrogen atom mainly from the amine radical cation; formate and Hantzsch ester are described as likely further donors.[16]
Figure 13. Photoredox reductive dehalogenation with Ru(bpy)3Cl2, iPr2NEt and Hantzsch ester.[9][16] (a) The photocatalyst cycle. (b) The hydrogen-atom donors named in the 2013 review, and the transfer from Hantzsch ester. Our drawing of the published cycle.
The method reduces benzylic and α-carbonyl halides but not aryl or vinyl ones.[16] For alkyl, alkenyl and aryl iodides, the same group later used fac-Ir(ppy)3 with tributylamine and Hantzsch ester or formic acid. In that system, the excited iridium complex reduces the iodide directly.[16]
In the ruthenium method, the electron comes from the amine. Hantzsch ester is one of several hydrogen-atom donors.
Can Hantzsch ester reduce the excited photocatalyst?
In a reductive quenching cycle, the excited photocatalyst accepts an electron from a donor. The oxidation potential of Hantzsch ester is +0.89 V vs SCE.[20] The step is downhill when the reduction potential of the excited catalyst, E(PC*/PC−), is more positive than this value (the general rule for electron transfer, not a statement of the cited papers).
Figure 14. Excited-state reduction potentials of four photocatalysts, from Table 1 of the review,[16] compared with the oxidation potential of Hantzsch ester measured by cyclic voltammetry.[20] The right-hand column gives the reducing power of each catalyst after it has accepted the electron. The two notes in italics mark published reactions in which Hantzsch ester was suggested (an epoxide opening) or observed by Stern–Volmer experiments (a hydroacylation) as the quencher, although the potentials are unfavourable.[16][34][35] Our chart of published values.
Of the four, only [Ir(dF(CF3)ppy)2(dtbbpy)]PF6 is above the line (+1.21 V). Excited Ru(bpy)32+ (+0.77 V), [Ir(ppy)2(dtbbpy)]PF6 (+0.66 V) and Ir(ppy)3 (+0.31 V) are below it.
Published results do not follow this comparison in every case:
- 1978, Kellogg and co-workers. In the reduction of phenacylsulfonium salts with Ru(bpy)32+, Stern–Volmer experiments showed that the N-methyl Hantzsch ester did not quench the excited catalyst.[16]
- 2011, Larraufie and co-workers in Paris. For the ring opening of α-keto epoxides and aziridines with Ru(bpy)32+, the 2013 review writes that Hantzsch ester may act as the reductive quencher and as a hydrogen-atom donor.[16][34]
- 2017, a hydroacylation of alkenes with fac-Ir(ppy)3. Stern–Volmer experiments indicated that Hantzsch ester was the main quencher of the excited catalyst at low concentrations.[35]
The comparison of potentials leaves out the steps that follow the electron transfer, such as the loss of a proton from the radical cation (section 2). This is our reasoning; the cited reports do not give this explanation.
Use the potentials as a first guide. If a reaction with Hantzsch ester as the only electron donor does not start, add an amine or use a photocatalyst whose excited state is a stronger oxidant than +0.89 V, such as [Ir(dF(CF3)ppy)2(dtbbpy)]PF6.
A photoreductant without a photocatalyst
A solution of Hantzsch ester in DMA absorbs visible light above 400 nm.[11] The excited ester, HEH*, is a strong reductant, with E(HEH•+/HEH*) = −2.28 V vs SCE.[10][11] This value is more negative than those of excited Ir(ppy)3 (−1.73 V) and of Ru(bpy)3+ (−1.33 V).[16]
Figure 15. Reducing power of excited Hantzsch ester and of two common photocatalysts, our chart of the reported potentials (vs SCE).[10][11][16] A more negative potential means a stronger reductant. Values for excited states are derived from ground-state potentials and excitation energies, so they are approximate.
In 2016, Cho, You and co-workers showed that excited Hantzsch ester reduces α-bromo ketones directly. The resulting radical either takes a hydrogen atom from Hantzsch ester, which gives the debrominated ketone, or reacts with oxygen to form the α-hydroxy ketone. The solvent, the O2 level and the concentration of Hantzsch ester determine which product forms.[10]
Figure 16. Photoreduction of an α-bromo ketone by Hantzsch ester without a photocatalyst.[10] The intermediate radical gives the ketone with Hantzsch ester, or the α-hydroxy ketone with oxygen. Our drawing.
After excitation, Hantzsch ester is a stronger reductant than excited Ir(ppy)3, so some reductions need no photocatalyst.
Nickel cross-coupling through an EDA complex
In 2021, the group of Gary Molander reported that Hantzsch ester and an NHPI ester form a 1:1 EDA complex, with an association constant of 2.04 M−1 in DMA.[11] Under 390 nm light, an electron moves from Hantzsch ester to the NHPI ester, which loses CO2 and the phthalimide anion and leaves an alkyl radical. The nickel catalyst couples this radical with an aryl bromide. In the mechanism proposed by the authors, excited Hantzsch ester also delivers the active Ni(0) species by single-electron transfer. No photocatalyst and no metal reductant are needed.[11]
Figure 17. Radical formation through the EDA complex, drawn by us from the paper.[11] The association constant comes from a Benesi–Hildebrand analysis of UV/vis data, and a Job plot showed a 1:1 complex. The donor above the acceptor is a schematic drawing; the paper reports no structure of the complex.
Figure 18. Nickel cross-coupling with Hantzsch ester under 390 nm light. (a) Worked example: 5-bromopicolinonitrile and the NHPI ester of cyclohexanecarboxylic acid give 5-cyclohexylpicolinonitrile in 79% yield (74 mg, 0.50 mmol scale).[11] (b) The two roles of Hantzsch ester and the control experiments. The nickel complex has the ligand 4,4′-di-tert-butyl-2,2′-bipyridine (dtbbpy). NHPI esters are made from N-hydroxyphthalimide. Scheme drawn by us.
Without light or nickel, no product formed; without Hantzsch ester, only traces. With TEMPO, the adduct of the radical was isolated in 63% yield.[11]
Hantzsch ester has two roles in this reaction: it forms the radical through the EDA complex, and it is the reductant for nickel.
A different reagent: 4-alkyl Hantzsch esters
A Hantzsch ester with an alkyl group at C-4 gives carbon radicals, not hydrogen. It is made in one step from an aldehyde. After the loss of one electron, the C4–C bond breaks, and the products are the alkyl radical and the Hantzsch pyridine.[2][36] In 2016, the Molander group coupled such radicals with aryl bromides by nickel and photoredox catalysis.[36]
Figure 19. A 4-benzyl Hantzsch ester releases its substituent as a radical under 405 nm light without a photocatalyst.[37] Our drawing.
In 2017, Paolo Melchiorre and co-workers excited 4-alkyl Hantzsch esters directly. The 4-benzyl compound absorbs up to about 420 nm, with a maximum at 343 nm. Under a 405 nm LED it gave the benzyl radical for nickel-catalysed couplings with aryl bromides and acyl chlorides.[37]
Our product is the unsubstituted Hantzsch ester of Scheme 1. It transfers hydrogen and electrons; it does not transfer an alkyl group.
Under light, Hantzsch ester gives hydrogen atoms and electrons. After direct excitation it needs no photocatalyst: it reduces α-bromo ketones and supplies the electrons for a nickel cross-coupling.
Products: Hantzsch ester · Ru(bpy)3Cl2 · Ir(ppy)3 · [Ir(dF(CF3)ppy)2(dtbbpy)]PF6 · [Ir(ppy)2(dtbbpy)]PF6 · dtbbpy · NHPI · TEMPO
6. Why a reduction fails
Table 3 lists observations, their likely causes and what to do.
| Observation | Likely cause | What to do |
|---|---|---|
| The reduction is slower than expected or stops early | Part of the reagent has been oxidised to the pyridine, so a weighed amount contains less Hantzsch ester | Measure the ester-to-pyridine ratio by 1H NMR (section 7) and correct the amount |
| A quinoline reduction stops at partial conversion | Each quinoline needs two hydrides | Use at least 2 equiv of Hantzsch ester; the original work used 2.4 equiv[8] |
| An enal reduction is slow or gives a low ee | Both depend on the ester group of the donor and on the catalyst | Use the diethyl ester (92% conversion in 7 h; the dimethyl ester gave 57% in 26 h) and the catalyst salt reported for the substrate class[6] |
| A cyclic enone gives no product under the conditions for enals | A ketone forms the iminium ion less readily; the salts for enals gave 0% and 5% | Use the furyl imidazolidinone with TCA in diethyl ether at 0 °C[17] |
| An enone reduction gives a low ee | The ee depends on the ester group | Try the bulkier di-tert-butyl ester: 91% ee against 74% with Hantzsch ester for 3-phenyl-2-cyclopentenone[17] |
| An N-alkyl dihydropyridine in place of Hantzsch ester gives low conversion | Presumed cause: it ends as a 1-alkylpyridinium ion and not as the protonated pyridine needed for catalyst turnover | Use a dihydropyridine with a free N–H group, such as Hantzsch ester[3] |
| A thiourea reductive amination gives low conversion | The solvent is too polar, water is left in the mixture, or the catalyst is too weak a hydrogen-bond donor (see the caution in section 4) | Use toluene, benzene or dichloromethane, with 5 Å molecular sieves.[27] If the conversion stays low, change to Schreiner’s thiourea, which gave 86% with benzaldehyde where another catalyst was reported as inefficient[28][29] |
| A photoredox reaction with Hantzsch ester as the only donor does not start | Hantzsch ester may not quench the excited catalyst; by the potentials, the step is uphill below +0.89 V | Add an amine as the electron donor, or use a stronger excited-state oxidant, such as [Ir(dF(CF3) |
| A reaction under light does not start | No light of the right wavelength reaches the mixture; without light, the nickel coupling gave no product | Check the lamp (390 nm in the original work) and the vessel; in that work, DMA was essential as the solvent[11] |
| The α-hydroxy ketone forms instead of the debrominated product | Oxygen traps the ketone radical | Degas the solvent; the product also depends on the solvent and on the concentration of Hantzsch ester[10] |
| An aryl or vinyl halide is unchanged in a Ru(bpy)3 dehalogenation | Expected: the method reduces benzylic and α-carbonyl halides only[16] | For an iodide, use fac-Ir(ppy)3 with tributylamine and Hantzsch ester or formic acid[16] |
| The Hantzsch pyridine appears in the crude product | Expected by-product, formed in the same molar amount as the Hantzsch ester that reacted | Extraction does not remove it.[18] Plan a chromatographic separation; identify the pyridine by its singlets at 8.68 and 2.85 ppm in CDCl3.[38] For an amine product, one study removed it by basic hydrolysis[26] |
Table 3. Troubleshooting of reductions with Hantzsch ester.
Check the reagent first: its pyridine content (section 7) and the number of equivalents the substrate needs. Then compare the catalyst, the solvent and the light source with the published conditions for the substrate class.
Products: Hantzsch ester · Schreiner’s thiourea · [Ir(dF(CF3)ppy)2(dtbbpy)]PF6 · Ir(ppy)3
7. Checking a bottle by 1H NMR
Hantzsch ester and its pyridine give well-separated signals in CDCl3. The C-4 methylene of the ester (3.24 ppm, 2H) becomes the aromatic H-4 of the pyridine (8.68 ppm, 1H).[21][38] Both singlets are clear of other signals, so their ratio gives the fraction of oxidised material.
Figure 20. 1H NMR spectra in CDCl3: (a) Hantzsch ester and (b) the Hantzsch pyridine, at 400 MHz, simulated by us from the published shifts and coupling constants.[21][38] The small boxes are expansions of the quartets and triplets. The areas follow the number of protons. The OCH2 signal of the pyridine is drawn as a quartet (see the note to Table 4). These are not measured spectra.
| Protons | Hantzsch ester | Hantzsch pyridine |
|---|---|---|
| a, NH | 5.39 (br s, 1H) | – |
| b, OCH2 | 4.15 (q, J = 7.1 Hz, 4H) | 4.40 (4H)a |
| c, C-4 | 3.24 (s, 2H) | 8.68 (s, 1H) |
| d, 2,6-CH3 | 2.17 (s, 6H) | 2.85 (s, 6H) |
| e, OCH2CH3 | 1.26 (t, J = 7.1 Hz, 6H) | 1.42 (t, J = 7.14 Hz, 6H) |
Table 4. 1H NMR data in CDCl3 (400 MHz). Ester data from ref. 21, pyridine data from ref. 38. a Reported as dd, J = 14.28 and 7.16 Hz; these two values give the four line positions of a quartet with J = 7.1 Hz (our calculation). The letters match Figure 20.
Worked example: the fraction of pyridine
Figure 21. Example integrals for the calculation below, with the integral traces in gold. The pyridine signal is drawn at 20 times the vertical scale. This is not a measured sample.
The calculation has five steps:
- Set the ester singlet at 3.24 ppm to 2.00. It has two protons, so it corresponds to 1.00 part of ester.
- The pyridine singlet at 8.68 ppm integrates 0.04. It has one proton, so it corresponds to 0.04 part of pyridine.
- Fraction of pyridine = 0.04 / (1.00 + 0.04) = 3.8 mol%.
- The molar masses are almost equal (251.28 and 253.29 g/mol), so the fraction by weight is also 3.8%.
- To add 1.20 equiv of Hantzsch ester, weigh 1.20 / 0.962 = 1.25 equiv, calculated with the molar mass of the ester.
Both signals must relax fully between scans, or the integrals are wrong. Our article on NMR yields and the relaxation delay explains how to choose the waiting time. Our 1H NMR measurement (Package I, 400 MHz) gives this ratio for a sample of your bottle.
The singlets at 3.24 ppm (ester, 2H) and 8.68 ppm (pyridine, 1H) give the fraction of oxidised reagent, which is then used to correct the weighed amount.
Products: Hantzsch ester
8. Storage, handling and amounts
The storage conditions, the retest period and the solubility are given in Table 2.[4] The 2007 account reports that a blend of an imidazolidinone catalyst (10 mol%) and Hantzsch ester (120 mol%) remained catalytically active after 72 months of storage at 0 °C.[3]
Hantzsch ester is not classified as dangerous goods for transport (ADR, IATA, IMDG).[4]
How much substrate a pack can reduce
| Pack | Hantzsch ester (mmol) | Substrate (mmol) at 1.2 equiv | Quinoline (mmol) at 2.4 equiv |
|---|---|---|---|
| 5.0 g | 19.7 | 16.5 | 8.2 |
| 10 g | 39.5 | 32.9 | 16.5 |
| 25 g | 98.7 | 82.3 | 41.1 |
| 50 g | 197.4 | 164.5 | 82.3 |
| 100 g | 394.8 | 329.0 | 164.5 |
| 250 g | 987.0 | 822.5 | 411.3 |
Table 5. Millimoles of Hantzsch ester per pack, calculated with 253.29 g/mol for the pure compound. The substrate columns use 1.2 equiv of Hantzsch ester, as in the reductive amination of Figure 9, and 2.4 equiv for quinolines, which accept two hydrides (Figure 11). Hantzsch ester that reacts forms the same molar amount of the pyridine (251.28 g/mol): 251 mg per millimole.
Keep the reagent cool, dry, sealed and dark. For thermal reactions, we recommend setting up the flask away from strong light, because the excited ester reacts differently (section 5).
Products: Hantzsch ester
9. Summary
- Hantzsch ester transfers a hydride and a proton and becomes the Hantzsch pyridine. With an organocatalyst, it reduces C=C and C=N bonds without a metal or hydrogen gas; halogens, esters and aldehydes are inert under these conditions (section 1).
- It is a mild hydride donor, with a Mayr nucleophilicity of 9.00 in dichloromethane. Most substrates need a catalyst that makes them more electrophilic (section 3).
- Each substrate class has its own catalyst: a chiral imidazolidinone salt for enals, a furyl imidazolidinone for cyclic enones, a chiral phosphoric acid for imines and quinolines, and thiourea or Schreiner’s thiourea for achiral amines, nitroalkanes and racemic tetrahydroquinolines (section 4).
- A quinoline needs two hydrides. The original work used 2.4 equiv of Hantzsch ester (section 4).
- Under light, Hantzsch ester gives electrons and hydrogen atoms. In the Ru(bpy)3 dehalogenation, the electron comes from the amine, and Hantzsch ester is one of several hydrogen-atom donors. Excited Hantzsch ester (−2.28 V vs SCE) reduces α-bromo ketones without a photocatalyst. With an NHPI ester, it forms an EDA complex and serves as the reductant in a nickel cross-coupling (section 5).
- The potentials are a first guide, not a rule: Hantzsch ester has been suggested or observed as the quencher of excited photocatalysts whose values lie below +0.89 V (section 5).
- A 4-alkyl Hantzsch ester is a different reagent. It gives carbon radicals; the unsubstituted compound transfers hydrogen and electrons (section 5).
- The reagent that reacts ends as the same molar amount of Hantzsch pyridine, 251 mg per millimole, and extraction does not remove it (sections 1 and 6).
- A 1H NMR spectrum in CDCl3 shows how much pyridine a bottle contains: compare the singlets at 3.24 ppm (ester, 2H) and 8.68 ppm (pyridine, 1H) (section 7).
- Store the reagent cool, dry, sealed and protected from light. Thermal reactions are best set up away from strong lamps and sunlight (section 8).
Products in this article
The table lists the NorrChemica products named in this article, with the use of each product and the sections that describe it.
| Product | CAS number | Purity | Use in this article | Sections |
|---|---|---|---|---|
| Hantzsch ester, diethyl 1,4-dihydro-2,6-dimethylpyridine-3,5-dicarboxylate | 1149-23-1 | ≥97% | Hydride donor in organocatalytic reductions; hydrogen-atom and electron donor under light; photoreductant and reductant for nickel | 1, 2, 3, 4, 5, 6, 7, 8 |
| Schreiner’s thiourea | 1060-92-0 | ≥98% | Hydrogen-bond catalyst for the reduction of aldimines, nitroalkenes and quinolines | 4, 6 |
| Ru(bpy)3Cl2 | 14323-06-9 | ≥98% | Photocatalyst in the reductive dehalogenation | 5, 6 |
| Ir(ppy)3 | 94928-86-6 | ≥98% | Photocatalyst for the reduction of iodides | 5, 6 |
| [Ir(dF(CF3) |
870987-63-6 | ≥98% | Photocatalyst whose excited state is a stronger oxidant than +0.89 V | 5, 6 |
| [Ir(ppy)2 |
676525-77-2 | ≥97% | Photocatalyst in the comparison of excited-state potentials | 5 |
| 4,4′-Di-tert-butyl-2,2′-bipyridine (dtbbpy) | 72914-19-3 | ≥98% | Ligand of the nickel complex in the cross-coupling | 5 |
| N-Hydroxyphthalimide (NHPI) | 524-38-9 | ≥98% | Starting material for NHPI esters | 5 |
| TEMPO | 2564-83-2 | ≥97% | Radical trap in the control experiment of the nickel coupling | 5 |
Hantzsch ester from NorrChemica
Packs from 5 g to 250 g, each with CoA and SDS. Prices are on the product page. Shipped from Finland, with DDP delivery worldwide.
- Hantzsch ester, ≥97%CAS 1149-23-1
- 1H NMR measurement, Package I400 MHz
References
- C. Zheng, S.-L. You. Transfer hydrogenation with Hantzsch esters and related organic hydride donors. Chem. Soc. Rev. 2012, 41, 2498–2518 (review). doi:10.1039/c1cs15268h
- P.-Z. Wang, J.-R. Chen, W.-J. Xiao. Hantzsch esters: an emerging versatile class of reagents in photoredox catalyzed organic synthesis. Org. Biomol. Chem. 2019, 17, 6936–6951 (review). doi:10.1039/c9ob01289c
- S. G. Ouellet, A. M. Walji, D. W. C. MacMillan. Enantioselective organocatalytic transfer hydrogenation reactions using Hantzsch esters. Acc. Chem. Res. 2007, 40, 1327–1339 (account). Author copy
- NorrChemica. Hantzsch ester, CAS 1149-23-1, ≥97%: product data. Product page
- J. W. Yang, M. T. Hechavarria Fonseca, B. List. A metal-free transfer hydrogenation: organocatalytic conjugate reduction of α,β-unsaturated aldehydes. Angew. Chem. Int. Ed. 2004, 43, 6660–6662. doi:10.1002/anie.200461816
- S. G. Ouellet, J. B. Tuttle, D. W. C. MacMillan. Enantioselective organocatalytic hydride reduction. J. Am. Chem. Soc. 2005, 127, 32–33. doi:10.1021/ja043834g
- M. Rueping, E. Sugiono, C. Azap, T. Theissmann, M. Bolte. Enantioselective Brønsted acid catalyzed transfer hydrogenation: organocatalytic reduction of imines. Org. Lett. 2005, 7, 3781–3783. doi:10.1021/ol0515964
- M. Rueping, A. P. Antonchick, T. Theissmann. A highly enantioselective Brønsted acid catalyzed cascade reaction: organocatalytic transfer hydrogenation of quinolines and their application in the synthesis of alkaloids. Angew. Chem. Int. Ed. 2006, 45, 3683–3686. doi:10.1002/anie.200600191
- J. M. R. Narayanam, J. W. Tucker, C. R. J. Stephenson. Electron-transfer photoredox catalysis: development of a tin-free reductive dehalogenation reaction. J. Am. Chem. Soc. 2009, 131, 8756–8757. doi:10.1021/ja9033582
- J. Jung, J. Kim, G. Park, Y. You, E. J. Cho. Selective debromination and α-hydroxylation of α-bromo ketones using Hantzsch esters as photoreductants. Adv. Synth. Catal. 2016, 358, 74–80. doi:10.1002/adsc.201500734
- L. M. Kammer, S. O. Badir, R.-M. Hu, G. A. Molander. Photoactive electron donor–acceptor complex platform for Ni-mediated C(sp3)–C(sp2) bond formation. Chem. Sci. 2021, 12, 5450–5457. doi:10.1039/d1sc00943e
- Max-Planck-Institut für Kohlenforschung. Research report 2002–2004, section 2.2.4, “Metal-free catalytic hydrogenation” (B. List). PDF
- J. W. Yang, M. T. Hechavarria Fonseca, N. Vignola, B. List. Metal-free, organocatalytic asymmetric transfer hydrogenation of α,β-unsaturated aldehydes. Angew. Chem. Int. Ed. 2005, 44, 108–110. doi:10.1002/anie.200462432
- R. I. Storer, D. E. Carrera, Y. Ni, D. W. C. MacMillan. Enantioselective organocatalytic reductive amination. J. Am. Chem. Soc. 2006, 128, 84–86. doi:10.1021/ja057222n
- Z. Zhang, P. R. Schreiner. Organocatalytic biomimetic reduction of conjugated nitroalkenes. Synthesis 2007, 2559–2564. doi:10.1055/s-2007-983805
- C. K. Prier, D. A. Rankic, D. W. C. MacMillan. Visible light photoredox catalysis with transition metal complexes: applications in organic synthesis. Chem. Rev. 2013, 113, 5322–5363 (review). doi:10.1021/cr300503r
- J. B. Tuttle, S. G. Ouellet, D. W. C. MacMillan. Organocatalytic transfer hydrogenation of cyclic enones. J. Am. Chem. Soc. 2006, 128, 12662–12663. doi:10.1021/ja0653066
- S. A. Van Arman, A. J. Zimmet, I. E. Murray. A Hantzsch amido dihydropyridine as a transfer hydrogenation reagent for α,β-unsaturated ketones. J. Org. Chem. 2016, 81, 3528–3532. doi:10.1021/acs.joc.6b00041
- X.-Q. Zhu, H.-R. Li, Q. Li, T. Ai, J.-Y. Lu, Y. Yang, J.-P. Cheng. Determination of the C4–H bond dissociation energies of NADH models and their radical cations in acetonitrile. Chem. Eur. J. 2003, 9, 871–880. doi:10.1002/chem.200390108
- J. D. Smith, A. M. Jamhawi, J. B. Jasinski, F. Gallou, J. Ge, R. Advincula, J. Liu, S. Handa. Organopolymer with dual chromophores and fast charge-transfer properties for sustainable photocatalysis. Nat. Commun. 2019, 10, 1837. doi:10.1038/s41467-019-09316-5
- Z. Li, J.-D. Yang, J.-P. Cheng. Thermodynamic and kinetic studies of hydride transfer from Hantzsch ester under the promotion of organic bases. Org. Chem. Front. 2021, 8, 876–882 (supporting information). doi:10.1039/d0qo01478h
- D. Richter, H. Mayr. Hydride-donor abilities of 1,4-dihydropyridines: a comparison with π nucleophiles and borohydride anions. Angew. Chem. Int. Ed. 2009, 48, 1958–1961. doi:10.1002/anie.200804263
- R. J. Mayer, J. Moran. Quantification of the hydride donor abilities of NADH, NADPH, and BH3CN− in water. Org. Biomol. Chem. 2023, 21, 85–88. doi:10.1039/d2ob02041f
- Mayr's Database of Reactivity Parameters, Ludwig-Maximilians-Universität München. Entries for the hydride donors shown in section 3, read on 20 November 2026. Database
- S. Hoffmann, A. M. Seayad, B. List. A powerful Brønsted acid catalyst for the organocatalytic asymmetric transfer hydrogenation of imines. Angew. Chem. Int. Ed. 2005, 44, 7424–7427. doi:10.1002/anie.200503062
- V. N. Wakchaure, M. Nicoletti, L. Ratjen, B. List. Towards a practical Brønsted acid catalyzed and Hantzsch ester mediated asymmetric reductive amination of ketones with benzylamine. Synlett 2010, 2708–2710. doi:10.1055/s-0030-1259003
- D. Menche, F. Arikan. Thiourea-catalyzed direct reductive amination of aldehydes. Synlett 2006, 841–844. doi:10.1055/s-2006-939052
- Z. Zhang, P. R. Schreiner. Thiourea-catalyzed transfer hydrogenation of aldimines. Synlett 2007, 1455–1457. doi:10.1055/s-2007-980349
- Highlight of ref. 28: Thiourea-catalyzed transfer hydrogenation of aldimines. Synfacts 2007, 988. doi:10.1055/s-2007-968883
- Z. Zhang, Z. Bao, H. Xing. N,N′-Bis[3,5-bis(trifluoromethyl)phenyl]thiourea: a privileged motif for catalyst development. Org. Biomol. Chem. 2014, 12, 3151–3162 (review). doi:10.1039/c4ob00306c
- X. Qiao, Z. Zhang, Z. Bao, B. Su, H. Xing, Q. Yang, Q. Ren. Thiourea as an efficient organocatalyst for the transfer hydrogenation of 2-substituted quinoline derivatives. RSC Adv. 2014, 4, 42566–42568. doi:10.1039/c4ra05854b
- D. B. Ramachary, G. B. Reddy. Towards organo-click reactions: development of pharmaceutical ingredients by using direct organocatalytic bio-mimetic reductions. Org. Biomol. Chem. 2006, 4, 4463. doi:10.1039/b612611a
- D. B. Ramachary, M. Kishor. Organocatalytic sequential one-pot double cascade asymmetric synthesis of Wieland–Miescher ketone analogues from a Knoevenagel/hydrogenation/Robinson annulation sequence. J. Org. Chem. 2007, 72, 5056–5068. doi:10.1021/jo070277i
- M.-H. Larraufie, R. Pellet, L. Fensterbank, J.-P. Goddard, E. Lacôte, et al. Visible-light-induced photoreductive generation of radicals from epoxides and aziridines. Angew. Chem. Int. Ed. 2011, 50, 4463–4466. doi:10.1002/anie.201007571
- A. Banerjee, Z. Lei, M.-Y. Ngai. Acyl radical chemistry via visible-light photoredox catalysis. Synthesis 2019, 51, 303–333 (review). Open copy
- Á. Gutiérrez-Bonet, J. C. Tellis, J. K. Matsui, B. A. Vara, G. A. Molander. 1,4-Dihydropyridines as alkyl radical precursors: introducing the aldehyde feedstock to nickel/photoredox dual catalysis. ACS Catal. 2016, 6, 8004–8008. Open copy
- L. Buzzetti, A. Prieto, S. R. Roy, P. Melchiorre. Radical-based C–C bond-forming processes enabled by the photoexcitation of 4-alkyl-1,4-dihydropyridines. Angew. Chem. Int. Ed. 2017, 56, 15039–15043. Open copy
- C.-B. Bai, N.-X. Wang, Y.-J. Wang, X.-W. Lan, Y. Xing, J.-L. Wen. A new oxidation system for the oxidation of Hantzsch-1,4-dihydropyridines and polyhydroquinoline derivatives under mild conditions. RSC Adv. 2015, 5, 100531–100534 (supporting information). doi:10.1039/c5ra20977c
About this article. The article is based on the 38 sources in the reference list. We read the full texts of these sources: the enal and enone papers (refs. 6 and 17, author copies), the thiourea reductive amination paper (ref. 27, author manuscript), the thiourea quinoline paper (ref. 31, author version), the nickel paper and its supporting information (ref. 11), and the supporting information of refs. 21, 8 and 38. On 20 November 2026 we checked refs. 6, 17, 11 and 31 again, one claim at a time, through extracts of the full texts. We worked from such extracts for the account (ref. 3, author copy), the institute report (ref. 12, which is our source for the conditions of refs. 5 and 13), the first half of the photoredox review with its Table 1 (ref. 16, author copy), the section on anhydrides of ref. 35 and ref. 37. The N values are from the pages of the Mayr database (ref. 24). The CAS number of the Hantzsch pyridine in Scheme 1 is from a supplier catalogue page. For the other references, including refs. 19, 32, 33, 34, 36, 28 and 29, we read the abstracts, publisher pages, published highlights or excerpts. All sources were read on 20 November 2026. Yields are as reported. Statements marked as our reading or our reasoning are not from the cited sources. The 1H NMR figures are drawn from published shifts, and the integrals in Figure 21 are an example. This article is a guide to the literature, not a laboratory protocol. The full procedures are in the references.
© 2026 NorrChemica. All rights reserved.
Content may not be reproduced without written permission.